Product Introduction
In high-traffic industrial facilities, the layout of the changing room often dictates furniture choice. Standard single-column lockers fail to fit heavy turnout gear, while a full-width wardrobe blocks narrow aisles. The 2-door Locker utilizes a dual-door, wide-body frame to solve this spatial conflict. By splitting the cabinet into two full-height side-by-side compartments, it provides the necessary vertical clearance for bulky gear. During a recent delivery to a fire station, the installation crew discovered that the standard cardboard cartons wouldn't fit through the narrow hallway. Because the unit is flat-packed, the steel panels were easily carried in by hand and assembled on-site, saving significant logistical headaches.

Features and Application
The structural integrity relies heavily on proper load distribution. A frequent operational error with this dual-door model involves the central hanging rod. Because the rod spans the entire internal width without a center support pillar, hanging multiple heavy items (like wet fireman coats or thick tool bags) on a single side creates uneven lateral torque. Over time, the steel rod will flex and bend downward. Therefore, load distribution must be strictly symmetrical to prevent structural deformation.
Another critical detail is the ventilation. Louvered vents are stamped at the bottom of both doors. In a closed environment, damp raincoats and sweaty uniforms release moisture, turning dust into an abrasive, corrosive paste that degrades the metal. The bottom vents maintain vertical airflow to keep the interior dry. Finally, the dual-color powder coating (black frame, white doors) serves a functional purpose. The black frame effectively masks grease stains and scuff marks from heavy boots, which standard white cabinets fail to hide.
Delivery, Shipping and Service
Ocean freight is based on volume, and shipping pre-assembled furniture is a financial mistake. This 2-door Locker is strictly flat-packed, with the extra-wide panels nested tightly into a single carton. This volumetric reduction allows distributors to fit significantly more units into a 40HQ container, directly lowering the landed cost. A 3-year warranty covers the locking mechanisms. For warehouse management, maintaining a local inventory of replacement lock cylinders is required. If an employee loses a key, the hardened barrel lock cannot be easily picked. A locksmith will have to drill out the entire cylinder, which permanently destroys the door panel. Local replacement takes two minutes and avoids this expense.

FAQ
What is the actual internal width of each compartment?
The total internal span is approximately 900mm to 1000mm. Each side provides roughly 450mm of clear width. Standard backpacks and heavy winter coats fit easily, but oversized military-grade duffel bags will not fit if both compartments are fully occupied.
How is the unit secured to prevent forward tipping?
Wide-body cabinets with loaded hanging rods are front-heavy. If both doors are opened simultaneously, the center of gravity shifts forward. The back panel includes pre-drilled anchor holes. It is mandatory to bolt the unit to a concrete wall or structural studs using heavy-duty expansion bolts. Relying solely on base stability is a safety hazard.
Can the internal hanging rod be removed to create full-height space?
No. The heavy-duty hanging rod is spot-welded to the side frames to withstand industrial loads. Removing it will compromise the cabinet's structural rigidity. If full floor-to-ceiling space is required, the bottom shelf can be unbolted and removed during assembly.
Hot Tags: 2-door locker, China 2-door locker manufacturers, suppliers, factory, 12 door Locker, 18 door Locker, 4 door Locker, 9 door Locker, cloakroom locker, floor mounted locker
|
Brand |
JoYouS |
|
Material |
High-quality cold-rolled steel plate |
|
Size |
H1800*W850*D390mm / customized |
|
Structure |
Knocked down structure |
|
Packing volume |
0.152cbm |

